Friday, 22 April 2016

DSP processor (TMS320F28375)

This was a demonstration experiment where our seniors showed us how to operate a DSP processor by showing a project. The output of the project was verified with the help of a microphone and the noise present in the output was negligible. Our seniors showed us various instructions and their syntax. We performed arithmetic, logical and shift operations and observed the input and output before and after execution.
Posted by at

6 comments:

  1. Unknown25 April 2016 at 09:37

    Precise explanation

    ReplyDelete
  2. Unknown25 April 2016 at 10:16

    The DSP processors have many advantages over the normal Processors, isn't it Ma'am?

    ReplyDelete
    Replies
    1. Unknown25 April 2016 at 10:40

      yes,parallel execution is possible and therefore it is fast.It uses VLIW architecture and executes million instructions per second (MIPS). It has three computational units ALU,MAC and shifter.

      Delete
  3. Unknown25 April 2016 at 13:43

    JTAG cable was used to interface DSP processor and the computer rather than USBASP cable as JTAG allowed the user to check the values of the register of DSP processor in intermediate stages rather than just at the end which helps in debugging.

    ReplyDelete
  4. Unknown25 April 2016 at 21:56

    Thanks for the addition Ameya:)

    ReplyDelete
  5. Unknown25 April 2016 at 21:56

    Thanks for the addition Ameya:)

    ReplyDelete

Subscribe to: Post Comments (Atom)